Avaya P130 사용자 설명서

Chapter 6        Avaya P130 CLI

114

 Avaya P130 User’s Guide

Use the 

show snmp timeout command to display the default SNMP timeout in 

seconds. This command is useful for access using the Device Manager.

The syntax for this command is:
show snmp timeout

Example:
P130-N> show snmp timeout
the SNMP Timeout is 2000

Use the 

set snmp community command to set SNMP communities and 

associated access types.
There are three configurable SNMP communities, one for each access type. If you do 
not specify the community string, the string configured for that access type is 
cleared. One community string different from the default (“public”) should be 
configured for each access type in order for secure SNMP access.

The syntax for this command is:
set snmp community {read-only|read-write|trap} [community_string]

The default configuration has the following communities and access types defined:
read-only – public
read-write – public
public-trap – public

Example:

To set read-write access to the SNMP community called snow:
P130-1# set snmp community read-write snow
SNMP read-write community string set.

read-only

Assign read-only access to the specified SNMP community.

read-write

Assign read-write access to the specified SNMP community.

trap

Assign SNMP community to trap.

community_string

(Optional) Name of the SNMP community. If no name is 
specified this command will clear any community for this 
access type.