Avaya P130 사용자 설명서
Appendix B Specifications
136
Avaya P130 User’s Guide
Caution: The use of optical instruments with this product will increase eye hazard.
Usage Restriction
When a SFF/SFP GBIC transceiver is inserted in the module but is not in use, the
Tx and Rx ports should be protected with an optical connector or a dust plug.
Tx and Rx ports should be protected with an optical connector or a dust plug.
Caution: Use only Avaya approved SFF/SFP GBIC transceivers. All approved SFF/
SFP GBIC transceivers:
1) Are 3.3V. Do not insert a 5V SFF/SFP GBIC.
2) Use Serial Identification. Do not use a GBIC that utilizes Parallel Identification.
SFP GBIC transceivers:
1) Are 3.3V. Do not insert a 5V SFF/SFP GBIC.
2) Use Serial Identification. Do not use a GBIC that utilizes Parallel Identification.
Installation
Installing and Removing a SFF/SFP GBIC Transceiver
Caution: Use only 3.3V Avaya-authorized SFF/SFP GBIC transceivers.
Use only SFF/SFP GBIC transceivers that use Serial Identification.
Use only SFF/SFP GBIC transceivers that use Serial Identification.
The SFF/SFP GBIC transceiver is fastened using a snap-in clip.
To Install the SFF/SFP GBIC tranceiver:
•
•
Insert the transceiver (take care to insert it the right way up) until it clicks in
place.
place.
To Remove the SFF/SFP GBIC tranceiver:
1
1
Press the clip on the bottom side of the transceiver.
2
Pull the transceiver out.