Avaya P120 SMON 사용자 설명서

 29

Avaya P120 SMON User Guide

Method

The method used for monitoring the variable. Possible 
options are:

• Rate @ Interval - The Alarm uses the counter’s rate 

in the last interval.

• Total - The Alarm uses the absolute number of the 

counter from the time the device was last reset.

* Note:  The Alarms and Events tool can only 

configure Alarms using the 
Rate @ Interval method. To configure 
Alarms based on the absolute number of 
packets, use the CLI (Command Line 
Interface) or a third-party application.

Startup Alarm

The type of Event that can be generated as the first Event 
for the Alarm. Possible types are:

• Rising - The first Event that can be generated must 

be a Rising Event. If the rate falls below the Falling 
Threshold before it rises above the Rising Threshold, 
a Falling Event is not generated.

• Falling - The first Event that can be generated must 

be a Falling Event. If the rate rises above the Rising 
Threshold before it falls below the Falling Threshold, 
a Rising Event is not generated.

• Rising and Falling - The first Event generated can 

be a Rising or a Falling Event.

Rising Threshold

The upper threshold for the counter. 

Falling Threshold

The lower threshold for the counter. 

Owner

The owner of the Alarm. This is usually the person who 
created the Alarm.