Avaya 5400ZL 사용자 설명서

 

TMA; Reviewed: 
SPOC 7/21/2008 

Solution & Interoperability Test Lab Application Notes 

©2008 Avaya Inc. All Rights Reserved. 

5 of 21 

ProCurve-ACM 

 

The following equipment and software/firmware were used for the sample configuration 
provided: 
 

Avaya S8300 Server  

Avaya Communication Manager 
5.0 - R015x.00.0.825.4  

Avaya G700 Media Gateway 
 MGP 
 

MM712 DCP Media Module 

 
26.31.0 
HW05 / FW08 

Avaya SIP Enabled Services (SES)  

5.0 - SES-5.0.0.0-825.31 

Avaya Modular Messaging  - Messaging 
Application Server (MAS) 

3.1 

Avaya Modular Messaging - Message Storage 
Server (MSS) 

3.1 

Avaya IA 770 INTUITY AUDIX 

5.0 

Avaya 9600 Series IP Telephones 

Avaya one-X Deskphone SIP  
2.0.3 (SIP) 

Avaya 9600 Series IP Telephones 

Avaya one-X Deskphone Edition 
2.0 (H.323) 

Avaya 2410 Digital Telephone 

5.0 

ProCurve 5406zl by HP 
with J8705A module and RJ45 (J8177C 
Transceiver) 

FW-K.13.09 

ProCurve 3500yl-24-PWR by HP 

FW-K.13.09 

ProCurve 2610-24-PWR by HP 

FW-H.11.07 

ProCurve 2626-24-PWR by HP 

FW-H.10.50 

 

This section shows the steps used to configure Avaya Communication Manager. For detailed 
information on the installation, maintenance, and configuration of Avaya Communication 
Manager, refer to [1]. 

IP networks were originally designed to carry data on a best-effort delivery basis, which meant 
that all traffic had equal priority and an equal chance of being delivered in a timely manner. As a 
result, all traffic had an equal chance of being dropped when congestion occurred. To prioritize 
VoIP traffic, QoS is utilized and should be implemented throughout the entire network.  

 

In order to achieve prioritization of VoIP traffic, the VoIP traffic must be classified. The Avaya 
S8300 Server, Avaya G700 Media Gateway, Avaya SIP Enablement Services and Avaya IP 
telephones support both Layer 2 802.1.p/Q priority and Layer 3 DiffServ.