Avaya P334T-ML 사용자 설명서

Chapter 11        Avaya P330 Layer 2 Features

84

Avaya P334T-ML User’s Guide

The Avaya P330-ML learns the VLANs automatically from traffic received on ports 
in “bind-to-all” mode. The maximum number of VLANs, 252, includes these 
dynamically learned VLANs and any VLANs you added manually.

When the VLAN list for the switch is full, no further dynamic learning or manual 
VLAN configuration will be possible until the dynamically learned VLANs are 
deleted from the table. This is accomplished with the clear dynamic-vlans CLI 
command. 

When a VLAN-tagged packet arrives at a port, only the packets with the VLAN tag 
corresponding to the VLANs which are configured on the port will be accepted. 
Packets with other VLAN tags will be dropped. 

The following table contains a list of the CLI commands for the VLAN feature. The 
rules of syntax and output examples are all set out in detail in the Reference Guide.

In order to...

Use the following command...

Assign the Port VLAN ID (PVID) 

set port vlan

Define the port binding method

set port vlan-binding-mode

Define a static VLAN for a port

set port static-vlan

Configure the tagging mode of a 
port

set trunk

Create VLANs

set vlan

Display the port VLAN binding 
mode settings

show port vlan-binding-mode

Display VLAN tagging information 
of the ports, port binding mode, 
port VLAN ID and the allowed 
VLANs on a port

show trunk

Display the VLANs configured in 
the switch.

show vlan

Clear VLAN entries

clear vlan