Avaya P334T-ML 사용자 설명서

다운로드
페이지 176
Chapter 12        Avaya P330 Layer 3 Features
Avaya P334T-ML User’s Guide
141
NetBIOS Re-broadcast Configuration
NetBIOS Overview
Short for Network Basic Input Output System, an application programming 
interface (API) that augments the DOS BIOS by adding special functions for local-
area networks (LANs). Almost all LANs for PCs are based on the NetBIOS. Some 
LAN manufacturers have even extended it, adding additional network capabilities. 
The Avaya P330 can be configured to relay netbios UDP broadcast packets. This 
feature is used for applications such as WINS that use broadcast but may need to 
communicate with stations on other subnets or VLANs.
Configuration is performed on a per-interface basis. When a netbios broadcast 
packet arrives from an interface on which netbios rebroadcast is enabled, the packet 
is distributed to all other interfaces configured to rebroadcast netbios.
If the netbios packet is a net-directed broadcast (e.g., 149.49.255.255), the packet is 
relayed to all other interfaces on the list, and the IP destination of the packet is 
replaced by the appropriate interface broadcast address.
If the netbios broadcast packet is a limited broadcast (e.g., 255.255.255.255), it is 
relayed to all VLANs on which there are netbios-enabled interfaces. In that case, the 
destination IP address remains the limited broadcast address.
NetBIOS Re-broadcast Configuration CLI Commands
In order to...
Use the following command...
Set NetBIOS rebroadcasts mode on 
an interface
ip netbios-rebroadcast 
Disable NetBIOS rebroadcasts 
mode on an interface
 no ip netbios-rebroadcast