Avaya P330-ML-ML 사용자 설명서

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

90

Avaya P330-ML Reference Guide

User level: supervisor
Use the set port dot1x supp-timeout command to set the time for the port to 
wait for a reply from the Authentication Server before the session is terminated.

The syntax for this command is:

set port dot1x supp-timeout

 

<module/port> <seconds>

Example:

User level: supervisor
Use the set port dot1x tx-period command to set the time interval between 
attempts to access the Authenticated Station.

The syntax for this command is:

set port dot1x tx-period 

 

<module/port> <seconds>

Example:

User level: privileged, supervisor.
Use the set port duplex command to configure the duplex type of an Ethernet 
or Fast Ethernet port or range of ports. You can configure Ethernet and Fast 
Ethernet interfaces to either full duplex or half duplex. 

module/
port

Module and port number (or range of ports)

seconds

Number of seconds – 0 to 65535

P330-1(super)# set port dot1x supp-timeout 1/2 400

module/
port

Module and port number (or range of ports)

seconds

Number of seconds — 0-65535

P330-1(super)# set port dot1x quiet-period 1/2 5000