Avaya P330-ML-ML 사용자 설명서
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide
213
The syntax for this command is:
[no] arp timeout <seconds>
Example:
To set the arp timeout to one hour:
To set the arp timeout to one hour:
To restore the default arp timeout:
clear arp-cache
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear arp-cache command to delete dynamic entries from the ARP
cache and the IP route cache.
cache and the IP route cache.
The syntax for this command is:
clear arp cache[<vlan>|<ip addr>[<mask>]]
Example:
seconds
The amount of time, in seconds, that an entry remains
in the arp cache.
in the arp cache.
Router-N(configure)# arp timeout 3600
Router-N(configure)# no arp timeout
vlan
VLAN string (up to 16 characters)
ip addr
IP address
mask
IP mask
Router-N(configure)#
clear arp-cache
Flushing all arp entries
Flushed 100 ARP entries
Done!