Avaya P330-ML-ML 사용자 설명서

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

Avaya P330-ML Reference Guide

217

Use the copy module-config tftp command to upload the switch-level 
parameters from the current NVRAM running configuration into a file via TFTP.

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

Example:

Use the copy running-config scp command to upload the current 
switch-level parameters from the current NVRAM running configuration into a file 
via SCP.

The syntax for this command is:

copy running-config scp <filename> <ip> <mod_num>

filename

The file name (full path)

ip

The IP address of the TFTP server

mod-num

The switch number

P330-N# copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show tftp upload status' command

********************************************************************

* If you are currently running the P330-ML Device Manager 

application,*

* it is recommended to exit from it before performing configuration*

* download operations.                                             *

********************************************************************

filename

The file name (full path)

ip

The IP address of the SCP server

mod-num

The switch number