Avaya P330-ML-ML 사용자 설명서

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

Avaya P330-ML Reference Guide

259

User level: user, privileged, supervisor
Use the show ip route best-match command to display a routing table for a 
destination address.

The syntax for this command is:

show ip route best-match <dst addr>

Example:

User level: privileged, supervisor.
Use the show ip static route command to display the static routes.

The syntax for this command is:

show ip route static [<ip addr> [<mask>] ]

Example:

dst addr

IP address

Router-N> show ip route best-match 199.93.0.0

Searching for: 199.93.0.0

Showing 1 rows

Network

Mask

        Interface   Next-Hop    Cost TTL  Source

--------------- ------------------------------------------------  -----

199.93.0.0

255.255.0.0    e-135new     135.64.76.1  1   n/a  STAT-HI

ip-address

The IP address of the routes

mask

The ip mask of the routes.

Router-N> sh ip route static

Showing 34 rows

Network        Mask          Interface       Next-Hop      Cost Pref Active

------------- ------------ --------------- --------------- ---- ---- -----

10.0.8.0      255.255.255.0  e-36           149.49.36.11   1   high  Yes

135.0.0.0     255.0.0.0      e-135new       135.64.76.1    1   high  Yes

135.64.0.0    255.255.0.0    e-135          135.87.164.1   1   high  No

149.49.0.0    255.255.0.0     trial         10.10.254.253  1   low   Yes

149.49.2.0    255.255.255.0   n/a           v-Route-FW 1   1   high  Yes