Avaya P330-ML-ML 사용자 설명서

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

276

Avaya P330-ML Reference Guide

User level: privileged, supervisor.
Use the ip bootp-dhcp network command to configure the network from 
which the BOOTP/DHCP server shall allocate an address.  
Use the no ip bootp-dhcp network command to remove a network.

L Multiple networks can be configured and relayed per VLAN, by repeating the 

ip bootp-dhcp network

 commnd. If more than one network is configured, 

then the address allocation is based on a round-robin algorithm.

The syntax for this command is:

[no] ip bootp-dhcp network <ip-net>

Example:
To select the network 192.168.169.0 as the network from which an address shall be 
allocated for bootp/dhcp requests:

User level: privileged, supervisor.
Use the ip bootp-dhcp server command to add a bootp/dhcp server to 
handle BOOTP/DHCP requests received by this interface. 
Use the  no ip bootp-dhcp server  command to remove the server. A 
maximum of two servers can be added to a single interface. 

The syntax for this command is:

ip bootp-dhcp server <ip addr>

ip-net

The IP address of the network.

Router-N(configure-if:marketing) # ip bootp-dhcp network 

Done!

ip addr

The IP address of the server.