Avaya P330-ML-ML 사용자 설명서

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

Avaya P330-ML Reference Guide

289

User level: privileged, supervisor.
Use the ip vrrp preempt command to configure the router to preempt a lower 
priority master for the virtual router ID. 
Use the no  ip vrrp preempt command to disable preemption for the virtual 
router instance. 
By default, preemption is enabled.

The syntax for this command is:

[no] ip vrrp <vr-id> preempt

Example:

User level: privileged, supervisor.
Use the ip vrrp primary command to set the primary address that shall be 
used as the source address of VRRP packets for the virtual router ID. 
Use the no ip vrrp primary command to return to the default primary address 
for the virtual router instance. 
By default, the primary address is selected automatically by the device.

The syntax for this command is:

[no] ip vrrp <vr-id> primary <ip-address>

Example:

vr-id

Virtual Router ID (1-255)

Router-N(configure-if:marketing) # ip vrrp 1 preempt

Done!

vr-id

Virtual Router ID (1-255)

ip-address

Primary IP address of the virtual router. This address 
should be one of the router addresses on the VLAN.

Router-N(configure-if:marketing) # ip vrrp 1 primary 

Done!