Avaya P330-ML-ML 사용자 설명서
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
21
Example: (for Unix):
copy scp stack-config
User level: supervisor
Use the copy scp stack-config command to download a stack configuration
to the device via SCP.
L Only parameters that differ from the factory default settings for the switch are
Use the copy scp stack-config command to download a stack configuration
to the device via SCP.
L Only parameters that differ from the factory default settings for the switch are
included in the configuration file. Therefore, it is important to reinitialize the
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
The syntax for this command is:
copy scp stack-config
<filename> <ip>
P330-N# copy scp module-config /folder/P330-ML/module.cfg
149.49.100.41
Username: 330user
Password:
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show download status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
filename
Source file name on the SCP server (full path).
ip
The ip address of the SCP server.