Avaya P330-ML-ML 사용자 설명서

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

26

Avaya P330-ML Reference Guide

User level: supervisor
Use the copy startup-config scp command to upload the switch-level 
startup configuration from the active bank into a file via SCP.

The syntax for this command is:

copy startup-config scp <filename> <ip> <mod_num>

Example:

User level: supervisor
L This command applies to the P334T-ML only when it is in “Layer2” 

 device mode.

Use the copy startup-config tftp command to download a policy  
configuration from a TFTP server.
L Only parameters that differ from the factory default settings for the switch are 

included in the configuration file. Therefore, it is important to reinitialize the 
NVRAM to the factory default settings before downloading configuration files 
to the switch. To reinitialize the NVRAM, run the nvram initialize 
command.

filename

The file name (full path)

ip

The IP address of the SCP server

mod-num

The switch number

Username: 330user 

Password: 

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show upload status' command

********************************************************************

* If you are currently running the P330-ML Device Manager 

application,*

* it is recommended to exit from it before performing configuration*

* download operations.                                             *

********************************************************************