Avaya P330-ML-ML 사용자 설명서

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

32

Avaya P330-ML Reference Guide

User level: supervisor
L This command applies to P333T-PWR switches only and is used by P330-

ML-ML switches to control P333T-PWR modules in the stack.

Use the copy tftp SW_powerinline_image command to update the inline 
software application from a TFTP server to the memory of a designated module. 
You need to be in privilege mode to execute this command.

The syntax for this command is:

copy tftp SW_powerinline_image <image-file> <ip-addr> <mod-

num>

Example:

L Before executing the download, the following checks will be performed by 

embedded SW, on the TFTP server file:
— Ensure that the file size is within its allocated space.
— Check that the file contains embedded web SW for this application
— Verify file validity by calculating the checksum.

User level: supervisor
Use the crypto key generate command to create the host key.

image_file

Common name for the file that contain the Power 
over Ethernet (PoE) Software image and the 
Embedded Web archive (full path)

ip_addr

IP address of the TFTP host

mod_num

Target module number

Module: 5

Source file:

c:\p333t\p333t_203

Destination file:

Powerinline

Host:

192.168.49.10

Running state:

Downloading

Failure Display:

Access Violation

Last warning:

Download completed