Avaya P330-ML-ML 사용자 설명서
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
43
Example:
ip ssh enable
User level: supervisor
Use the ip ssh command to enable the SSH server.
Use the ip ssh command to enable the SSH server.
The syntax for this command is:
ip ssh enable
Example:
ip telnet enable
User level: supervisor
Use the ip telnet enable command to enable Telnet access to the device.
Use the ip telnet enable command to enable Telnet access to the device.
The syntax for this command is:
ip telnet enable
Example:
source
source ip address
destination
destination ip address
protocol
ip | tcp | udp | integer (1...255)
source port
integer (1...65535)
destination port
integer (1...65535)
established
value of TCP established bit
Router-N(configure)# ip simulate 100 192.67.85.12
193.76.54.25
P330-N# ip ssh enable
Done!
P330-N# ip telnet enable
Done!