Avaya P330-ML-ML 사용자 설명서

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

62

Avaya P330-ML Reference Guide

User level: privileged, supervisor.
Use the set cascading  command to control the generation of fault-traps for 
unconnected cascading links. This command is useful when cascading cables are 
not connected intentionally, and therefore no fault-traps are desired for this event. 

The syntax for this command is:

{up|down}fault-monitoring {enable|disable}

 

<mod-num> 

Example:

User level: privileged, supervisor.
Use the set device-mode command to select the module’s operating mode — 
Layer 2 or Router .
L This command is available on P330-ML-ML and P333R switches only.
The syntax for this command is:

 <mode>

Example:

User level: supervisor
Use the set dot1x max-req command to set maximum number of times the port 
tries to retransmit requests to the Authenticated Station before the session is 
terminated.

P330-N# set cascading down fault-monitoring enable 1

Module 1 cascading-down fault monitoring enabled

mode

• Router – switch operates at Layers 2 and 3. 
• Layer2 – switch operates at Layer 2.

This command will RESET the switch****

Reset **** do you want to continue (Y/N) ?

Done!