Avaya 882 사용자 설명서
Document No. 10-300077, Issue 2
5-21
Configuring SNMP
ATM Module
Community String
Community String
To delete a community string for the ATM-Uplink module, use the
following command:
following command:
(configure)#
no snmp-server atm-community <community-string>
[<ip-addr>]
provides an explanation of the command variables.
Setting the Administrative Contact
CLI Command
To set the administrative contact for the switch, use the following CLI
command:
command:
(configure)#
snmp-server contact <contact-name>
The switch displays the administrative contact when you enter the show
snmp command. For information on this command, see “
snmp command. For information on this command, see “
.”
provides an explanation of the command variable.
Table 5-11. no snmp-server community Command
Parameter
Definition
<community-string>
The community string that you want to delete.
[<ip-addr>]
The IP address from which you want to remove
access to the community string.
access to the community string.
Table 5-12. no snmp-server community Command
Parameter
Definition
<community-string>
The community string that you want to delete.
[<ip-addr>]
The IP address from which you want to remove
access to the community string.
access to the community string.
Table 5-13. snmp contact Command
Parameter
Definition
<contact-name>
The name of the administrative contact for the switch.
The contact name can range from 1 to 127 characters.
The contact name can range from 1 to 127 characters.