Avaya 882 사용자 설명서

15-12

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Chapter 15

You can prevent OSPF from sending routing updates across the network by 
using the OSPF passive-interface command. Enabling this command 
prevents OSPF from sending hello packets across the network. Any OSPF 
hello packets received from other OSPF routers on the network are also 
ignored. OSPF advertises the passive-interface as a stub network in the 
router updates it sends to other OSPF interfaces. 

You can set OSPF passive-interface using either the Web Agent or the CLI.

You can set OSPF passive-interface from the OSPF Interface Web page. 
The Interface-State field on the OSPF Interface Web page can be set to 
Passive, which disables the sending of OSPF routing updates. Normal, 
which enables the sending of OSPF routing updates, is the default.

You can set OSPF Passive Interface from the CLI using the following 
commands:

■

To define an OSPF interface as passive-interface: 

(configure router:ospf)# 

{<interface-name> | <ip-addr>}

■

To set the state of an OSPF interface that is configured as a passive-
interface to normal:

(configure router:ospf)# 

{<interface-name> | <ip-addr>}

You can create OSPF Virtual links using either the Web Agent or the CLI.

To create a OSPF virtual link using the Web Agent:

1.  In the navigation pane, expand the Routing > IP > OSPF folders, and 

then click Virtual Links. 

The OSPF Virtual Links Web page is displayed in the content pane. See 

.

*Note: The OSPF Web page displays only if OSPF virtual links 

were previously configured.