Avaya P580 사용자 설명서

                   15

610-0184-095

June 14, 2001

2.  Use the following command to manually add the “permitted” 

MAC addresses to the Address Forwarding Table (AFT):

>(config)# set aft entry <mac address> vlan <vlan-id> port-
binding forward <mod-port-spec>

3.  Use the following command to disable learning on a port or port 

range: 

>(config)# set port allow-learning <mod-

swport-range>

 

disable

4.  Use the following command to enable known-mode on a port 

or port range: 

>(config)# set port known-mode <mod-swport-range> enable

* Note:  To prevent any flooding of frames from unknown 

source addresses, enter all ports on the same 
VLAN as the port for which you are enabling MAC 
address lock. 

5.  Use the following command to enable intrusion traps on a port 

or port range: 

>(config)# set port intrusion-trap <mod-swport-range> enable

6.  Use the following command to set the intrusion trap timer to 

other than the default setting: 

>(config)# set port intrusion-trap-timer <mod-swport-range> 
<intrusion-trap-timer-value>

The MIB items that you use to perform this procedure are located in 
ProminetMib.txt, version 5.2.

To use SNMP to enable the MAC Address Lock feature and traps for 
unknown source addresses:

1.  Use the MIB items that are listed in Table 4 to manually add the 

“permitted” MAC addresses to the AFT.