Avaya P580 사용자 설명서

                   33

610-0184-095

June 14, 2001

It takes a few seconds before the Status button on the TFTP 
Download screen returns accurate information.

■

Automatic VLAN creation on P880 50-series supervisor 
module (M5500R-SUPA) does not work if the port default 
VLAN is set to “discard”. The switch does not learn VLANs 
with this setting.

■

Automatic VLAN creation on an 80-series supervisor module 
(M8000R-SUP) does work if the port default VLAN is set to 
“discard”.

■

If you set a port’s VLAN trunking mode to Clear, you must set 
the VLAN Binding Type to Static (default).

■

You may receive an error message stating that the VLAN 
name is already in use after you add a VLAN and refresh your 
browser.

If you click the Back button after you change a variable from the 
“Switch Port Config” screen, the variable will change back to the 
previous setting and the switch will reset. If you change a number of 
variables and click the Back button, the last variable will change 
back to the original value and the switch will reset.

This only happens on Microsoft Internet Explorer, version 
5.00.2919.6307. Use a later version of Microsoft Internet Explorer.

The following problems were found in the Cajun P550R/P880/P882 
Switch documentation for release v5.0 and will be fixed in release 
v6.0.

The following problem was found in the Cajun P550R/P880/P882 
Switch User Guide for release v5.0 and will be fixed in release v6.0.