Brocade Communications Systems 5100 사용자 설명서
36
EZSwitchSetup Administrator’s Guide
53-1002157-01
Managing devices
3
•
Reboot or power cycle the switch
When the switch is rebooted, the newly licensed ports come up as enabled.
When the switch is rebooted, the newly licensed ports come up as enabled.
•
Use the Advanced Management tool
See
See
on page 45 for information on
launching Web Tools.
•
Use the command line interface
See the Fabric OS Administrator’s Guide for information on using the command line
interface.
See the Fabric OS Administrator’s Guide for information on using the command line
interface.
Managing devices
The Devices page displays the following information:
•
Whether the device is an HBA, an HBA plus storage, or a storage only device.
•
Device alias name, if one exists.
•
Vendor name.
•
Device name.
•
WWN of the device port.
•
Switch and port to which the device is connected.
1. Click View under Devices in the task panel to display a table of information for all of the
connected devices (
).
The entries in the table are based on the device WWNs, so a single physical device can have
more than one entry in the table. The device information can be viewed, copied, or exported.
more than one entry in the table. The device information can be viewed, copied, or exported.
FIGURE 33
Devices view