Brocade Communications Systems IPMC5000PEF 사용자 설명서

     Group member at  e2/9: v59 

     Group member at  e1/16: v57 

3    Group 226.0.120.0

     Group member at  e2/9: v59 

     Group member at  e1/16: v57 

4    Group 226.0.163.0

     Group member at  e2/9: v59 

     Group member at  e1/16: v57 

5    Group 226.0.206.0

     Group member at  e2/9: v59 

     Group member at  e1/16: v57 

6    Group 226.0.249.0

     Group member at  e2/9: v59 

     Group member at  e1/16: v57 

7    Group 226.0.30.0

     Group member at  e2/9: v59 

     Group member at  e1/16: v57

device(config)#

Syntax: show ip pim [vrf vrf-name ] group

The vrf keyword allows you to display PIM group information for the VRF instance identified by the vrf-
name variable.

The following table describes the output from this command:

Output from the show ip pim group command 

Total number of Groups Lists the total number of IP multicast groups the device is forwarding.

NOTE
This list can include groups that are not PIM Sparse groups. If interfaces on the device
are configured for regular PIM (dense mode), these groups are listed too.

Index

The index number of the table entry in the display.

Group

The multicast group address

Ports

The device ports connected to the receivers of the groups.

Displaying BSR information

To display BSR information, enter the following command at any CLI level.

device(config)# show ip pim bsr

PIMv2 Bootstrap information for Vrf Instance : default-vrf

------------------------------------------------------------------------------ 

  This system is the Elected BSR

  BSR address: 1.51.51.1. Hash Mask Length 32. Priority 255. 

  Next bootstrap message in 00:01:00 

  Configuration: 

    Candidate loopback 2 (Address 1.51.51.1). Hash Mask Length 32. Priority 255.

Next Candidate-RP-advertisment in 00:01:00 

  RP: 1.51.51.1

    group prefixes:

    224.0.0.0 / 4

  Candidate-RP-advertisement period: 60

Displaying BSR information