Brocade Communications Systems IPMC5000PEF 사용자 설명서

Output fields from the show ip pim mcache command (Continued)

Profile

Shows the Profile ID associated with the Stream.

Number of matching
entries

Shows the total number of mcache entries matching a particular multicast filter specified.

Outgoing interfaces
Section

This section consists of three parts. L3 OIFs, L2OIFs and Blocked OIFs. And each
section has Format of L3/L2/Blocked followed by (HW/SW) followed by count of the
number of OIF in each section.

Additionally, each section displays the OIFs one per line. And shows the OIF in the
format eth/Tr(Vlan) followed by uptime/expiry time, followed by the Flags associated with
each OIF.

L3

Shows whether the traffic is routed out of the interface.

L2

Shows whether the traffic is switched out of the interface.

HW

Shows whether the entry is hardware forwarded.

SW

Shows whether the entry is software forwarded

Eth/Tr(VL1)

Shows the outgoing interface on the specified VLAN.

Flags (explanation of
flags in the OIF section)

Shows the flags set in each of the Outgoing interface in abbreviated string format whose
explanations are as below. Legend of this shown at the top of each entry

IM - Immediate

IH - Inherited

MJ - Membership Join

MI - Membership Include

ME - Membership Exclude

BR - Blocked due to SG RPT

BA - Blocked due to Assert

BF - Blocked due to Filter

BI - Blocked IIF (Incoming interface) matches OIF

Src-Vlan

Shows the VLAN associated with the ingress interface.

Displaying the PIM multicast cache for DIT

To display the PIM multicast cache for a specified dit, enter the following command at any CLI level.

Brocade#show ip pim mcache dit-idx 2

IP Multicast Mcache Table 

Entry Flags    : SM  - Sparse Mode, SSM - Source Specific Multicast, DM - Dense Mode 

                 RPT    - RPT Bit, SPT - SPT Bit, LSRC - Local Source, LRCV - Local 

Receiver 

Displaying the PIM multicast cache for DIT