Brocade Communications Systems IPMC5000PEF 사용자 설명서

Configure router PIM globally.

device(config)#router pim

Configure an IP address on the interface (physical, virtual routing, or tunnel interface) that will serve
as the IGMP proxy for an upstream device by entering commands such as the following.

device(config)#int e 1/3

device(config-if-e1000-1/3)#ip address 10.95.5.1/24

Enable PIM passive on the interface.

device(config-if-e1000-1/3)#ip pim passive

Enable IGMP Proxy on the interface.

device(config-if-e1000-1/3)#ip igmp proxy

Syntax: [no] ip igmp proxy

Filtering groups in proxy report messages

Once IGMP Proxy is configured and the router receives a query on an IGMP Proxy interface, the router
sends a report in response to the query before the IGMP maximum response time expires.

You can filter out groups in proxy report messages by specifying an access list name or number.

Brocade(config-if-e1000-1/3)#ip igmp proxy group-filter ACL1

Syntax: [no] ip igmp proxy group-filter access_list

To remove the group filter association without disabling the proxy, please apply the command ip igmp
proxy without the group filter option.

Displaying IGMP Proxy information

Use the show ip igmp proxy command to see information about the proxy groups and interfaces on
the default VRF. For other VRF instances, use the same command with the vrf option. For example,
show ip igmp proxy vrfvrf_name .

Brocade#sh ip igmp proxy

Proxy instance name: default-vrf

Total proxy groups: 4

Address             Mode      Source    ref       flags

                              count     count

----------------------------------------------------

225.1.1.1           exclude   0         0         0

225.1.1.2           exclude   0         0         0

225.1.1.3           exclude   0         0         0

225.1.1.4           exclude   0         0         0

Proxy interfaces

----------------

Name      Oper     Cfg       Unsoli    Filter    Filter

          Version  Robust    Interval  Acl Id    Name

-----------------------------------------------------

e1/3       2         2         1         0

Syntax: show ip igmp proxy

The report shows the following information.

Filtering groups in proxy report messages