Brocade Communications Systems 53-1001761-01 사용자 설명서

CEE Command Line Interface

2

NOTE

The CEE configuration is not affected by configUpload and configDownload commands entered in 
the Fabric OS shell.

Saving your configuration changes

Any configuration changes made to the switch are written into the running-config file. This is a 
dynamic file that is lost when the switch reboots. During the boot sequence, the switch resets all 
configuration settings to the values in the startup-config file.

To make your changes permanent, you must use either the write memory command or the copy 
command to commit the running-config file to the startup--config file.

Saving configuration changes with the copy command

Perform this task from Privileged EXEC mode.

1. Enter the copy command to save the running-config file to the startup-config file.

switch#copy running-config startup-config

Saving configuration changes with the write command

Perform this task from Privileged EXEC mode.

1. Enter the write memory command to save the running-config file to the startup-config file.

switch# write memory

Overwrite the startup config file (y/n): y

Building configuration...

CEE CLI RBAC permissions

Role-Based Action Control (RBAC) defines the capabilities that a user account has based on the 
role the account has been assigned. 

 displays the permissions matrix for CEE. Permissions 

are specifically defined as follows:

•

OM—When you enter the cmsh command, you are put directly into Privileged EXEC mode.

•

O—When you enter the cmsh command, you are limited to EXEC mode.

•

N—You are not allowed access to the CEE CLI. 

TABLE 2

CEE RBAC permissions

Root Factory

Admin

User

Operator

SwitchAdmin

FabricAdmin

ZoneAdmin

BasicSwitchAdmin

SecurityAdmin

OM

OM

OM

O

N

O

OM

N

N

O

O = observe, OM = observe and modify, N = access not allowed