Brocade Communications Systems 53-1001762-01 사용자 설명서
100
Converged Enhanced Ethernet Command Reference
53-1001762-01
lacp timeout
6
DRAFT: BROCADE CONFIDENTIAL
lacp timeout
Sets the timeout value used by LACP to exchange packets on an interface.
Synopsis
lacp timeout [long | short]
no lacp timeout
Operands
timeout
Specifies the number of seconds before invalidating a received Link
Aggregation Control Protocol (LACP) data unit (DU).
Aggregation Control Protocol (LACP) data unit (DU).
long
Specifies a long timeout value.
short
Specifies a short timeout value.
Defaults
By default, the short timeout value is 3 seconds for Brocade trunks. For standard trunks, the long
timeout value is 90 seconds.
timeout value is 90 seconds.
Command
Modes
Interface configuration mode
Description
Use this command to set the short timeout value for Brocade trunks or to set the long timeout
value for standard trunks. Use the no lacp timeout command to return to the default value.
value for standard trunks. Use the no lacp timeout command to return to the default value.
Usage
Guidelines
If the LACP_timeout bit (encoded in Actor_State and Partner_State fields) is set to 1, the short
timeout takes effect; if set to 0 (zero), the long timeout takes effect.
timeout takes effect; if set to 0 (zero), the long timeout takes effect.
Examples
To set the LACP short timeout value to 5 seconds:
switch(conf-if-te-0/1)#lacp timeout short 5
See Also
none