Brocade Communications Systems 53-1001762-01 사용자 설명서
Converged Enhanced Ethernet Command Reference
225
53-1001762-01
dot1x timeout server-timeout
13
DRAFT: BROCADE CONFIDENTIAL
dot1x timeout server-timeout
Sets the authentication sever response timeout.
Synopsis
dot1x timeout server-timeout seconds
Operands
seconds
Specifies the number of seconds that a switch waits for the transmission of
packets by the switch to the authentication server. The range of valid values
is 1-65535.
packets by the switch to the authentication server. The range of valid values
is 1-65535.
Defaults
The default timeout is 30 seconds.
Command
Modes
Interface configuration mode
Description
Use this command to set the authentication sever response timeout.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set 40 seconds as the switch-to-authentication server transmission time:
switch(config)#interface tengigabitethernet 0/1
switch(config-if)#dot1x timeout server-timeout 40
See Also
none