ZyXEL Communications XGS-4526 사용자 설명서

 Chapter 9 VLAN

XGS-4526/4528F/4728F User’s Guide

Click Subnet Based VLAN in the VLAN Port Setting screen to display the 
configuration screen as shown.

Note: Subnet based VLAN applies to un-tagged packets and is applicable only when 

you use IEEE 802.1Q tagged VLAN.

Figure 44   Advanced Application > VLAN > VLAN Port Setting > Subnet Based 

VLAN 

The following table describes the labels in this screen. 

Table 20   Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN 
Setup 

Active

Check this box to activate this subnet based VLANs on the Switch.

DHCP-Vlan 
Override

When DHCP snooping is enabled DHCP clients can renew their IP address 
through the DHCP VLAN or via another DHCP server on the subnet based 
VLAN.

Select this checkbox to force the DHCP clients in this IP subnet to obtain 
their IP addresses through the DHCP VLAN. 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Active

Check this box to activate the IP subnet VLAN you are creating or editing.

Name

Enter up to 32 alphanumeric characters to identify this subnet based VLAN.