ZyXEL Communications XGS-4526 사용자 설명서

 Chapter 32 Error Disable

XGS-4526/4528F/4728F User’s Guide

The following table describes the labels in this screen. 

Use screen to have the Switch detect whether the control packets exceed the rate 
limit configured for a port and configure the action to take once the limit is 
exceeded. Click the Click Here link next to Errdisable Detect link in the 
Advanced Application > Errdisable screen to display the screen as shown. 

Figure 150   Advanced Application > Errdisable > Errdisable Detect  

Table 104   Advanced Application > Errdisable > CPU protection 

Reason

Select the type of control packet you want to configure here.

Port

This field displays the port number.

*

Use this row to make the setting the same for all ports. Use this row first 
and then make adjustments to each port if necessary. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Rate Limit 
(pkt/s) 

Enter a number from 0 to 256 to specify how many control packets this 
port can receive or transmit per second.

0 means no rate limit.

You can configure the action that the Switch takes when the limit is 
exceeded. See 

 for detailed information.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.