ZyXEL Communications XGS-4526 사용자 설명서

Chapter 33 Private VLAN

XGS-4526/4528F/4728F User’s Guide

Click Advanced Application > Private VLAN in the navigation panel to display 
the screen as shown.

Figure 153   Advanced Application > Private VLAN  

The following table describes the labels in this screen.  

Table 107   Advanced Application > Private VLAN

Active

Check this box to enable private VLAN in a VLAN.

Name

Enter a descriptive name (up to 32 printable ASCII characters) for 
identification purposes. 

VLAN ID

Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule 
applies.

Promiscuous 
Ports

Enter the number of the port(s) that can communicate with any ports in 
the same VLAN. Other ports belonging to this VLAN will be added to the 
isolation list and can only send and receive traffic from the port(s) you 
specify here.

Add

Click Add to insert the entry in the summary table below and save your 
changes to the Switch’s run-time memory. The Switch loses these 
changes if it is turned off or loses power, so use the Save link on the top 
navigation panel to save your changes to the non-volatile memory when 
you are done configuring.

Cancel

Click Cancel to reset the fields to your previous configuration.

Clear

Click Clear to clear the fields to the factory defaults.

Index

This is the index number of the rule.

Active

This shows whether this rule is activated or not.

Name

This is the descriptive name for this rule. 

VLAN

This is the VLAN to which this rule is applied. 

Promiscuous 
Ports

This shows the port(s) that can communicate with any ports in the same 
VLAN.