ZyXEL Communications XGS-4526 사용자 설명서
Chapter 40 Differentiated Services
XGS-4526/4528F/4728F User’s Guide
360
40.4.1 Configuring DSCP Settings
To change the DSCP-IEEE 802.1p mapping, click the DSCP Setting link in the
DiffServ screen to display the screen as shown next.
DiffServ screen to display the screen as shown next.
Figure 184 IP Application > DiffServ > DSCP Setting
The following table describes the labels in this screen.
Table 129 IP Application > DiffServ > DSCP Setting
LABEL
DESCRIPTION
0 … 63
This is the DSCP classification identification number.
To set the IEEE 802.1p priority mapping, select the priority level from the drop-
down list box.
down list box.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on
the top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
loses these changes if it is turned off or loses power, so use the Save link on
the top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.