Motorola P880 사용자 설명서

Cajun P880 Routing Switch Installation Guide 

1 - 19

To install the front fan assembly:

1. Loosen the two captive screws securing the fan tray. 

2. Grasp the two captive screws and pull the fan assembly towards 

you (Figure 10).

3. Remove the fan tray from the chassis.

4. Insert the new fan tray into the chassis and slide it into place.

* Note:  Please be sure that the Pawl latches are not positioned in 

the locking position (the “nine o’clock” position).

5. Make sure that the fan tray is seated firmly, and tighten the 

captive screws.