ALTINEX MX2106AV 사용자 설명서
SWITCHER
5
APPLICATION DIAGRAM
5
DIAGRAM 1: TYPICAL CONFIGURATION
In addition to automatic switching, the MX2106AV may be controlled manually with an external switch, or using
ASCII commands over the RS-232 bus.
ASCII commands over the RS-232 bus.
If a remote switch is connected to the INPUT SELECT jack, INPUT 1 will be selected when the contact is open.
INPUT 2 will be selected if the channel select contact is closed. If the RS-232 cable is connected, the user may
send the command [ON1] to select input 1 or [ON2] to select input 2.
INPUT 2 will be selected if the channel select contact is closed. If the RS-232 cable is connected, the user may
send the command [ON1] to select input 1 or [ON2] to select input 2.
Auto-switching is disabled with either manual or RS-232 control. The switching will be identical whether there
are one or two active signals. The indicator lights located next to the input ports indicate which input is selected.
are one or two active signals. The indicator lights located next to the input ports indicate which input is selected.
MX2106AV