Allied Telesis AT-8000S 사용자 설명서

Page 27

4.

Insert the supplied screws into the rack mounting holes and tighten with a screwdriver.

5.

Repeat the process for the rack-mounting bracket on the other side of the device.

6.

Insert the device into the 19-inch rack and secure the unit to the rack with the rack screws (not provided by 
the ATI supplier). When securing, fasten the lower pair of screws before the upper pair of screws. This 
ensures that the weight of the unit is evenly distributed during installation. Ensure that the ventilation holes 
are not obstructed.

7.

Secure the unit to the rack with the rack screws. Fasten the lower pair of screws before the upper pair of 
screws. This ensures that the weight of the unit is evenly distributed during installation. Ensure that the 
ventilation holes are not obstructed.

This section describes how to connect the device, and includes the following sections:

Connecting the Switch to a Terminal

AC Power Connection

The device is connected to a terminal through a console port on the front panel of the 16 port device and the back 
panel for the 24/48 port devices. The console connection which enables a connection to a terminal desktop 
system running a terminal emulation software for monitoring and configuring the device. 

The terminal must be a VT100 compatible terminal or a desktop or portable system with a serial port and running 
VT100 terminal emulation software.