Alcatel-Lucent 6850-U24X 사용자 설명서

18

Your First Login Session

The switch’s default time zone is UTC (also referred to as 
Greenwich Mean Time). 

If you require a time zone that is specific to your region—or if 
you need to enable Daylight Savings Time (DST) on the 
switch—you can configure these settings via the

 and 

commands. For example, to set the system clock to run on 
Pacific Standard Time, enter the following command:

-> system timezone pst

To enable Daylight Savings Time, enter the following 
command:

-> system daylight savings time enable

Many other time zone variables are supported. For detailed 
information on configuring a time zone for the switch, refer to 
your OmniSwitch 6800/6850/9000 Switch Management Guide. 

Set the current time for the switch by entering system time, 
followed by the current time in hh:mm:ss. For example:

-> system time 18:35:00

The switch uses a 24-hour clock; the time value shown in the 
above example would set the time to 6:35 PM. 

To set the current date for the switch, enter system date, 
followed by the current date in mm/dd/yyyy. For example:

-> system date 06/27/2005

This section provides information on configuring optional 
system parameters, including:

the switch’s administrative contact

a system name

the switch’s physical location

An administrative contact is the person or department in 
charge of the switch. If a contact is specified, users can easily 
find the appropriate network administrator if they have ques-
tions or comments about the switch.

To specify an administrative contact, enter system contact, 
followed by a text string of up to 254 characters. If you 
include spaces between words in the text string, be sure to 
enclose the string in quotes (

" "

).

For example:

-> system contact "JSmith js@company.com"