Airlink101 ASW324 사용자 설명서
2
1
Introduction
Congratulations on your purchase of the 24-Port 10/100Mbps
Fast Ethernet Switch! It is an easy-installed network switch
which helps you to extend your network structure quickly and
reliably.
Fast Ethernet Switch! It is an easy-installed network switch
which helps you to extend your network structure quickly and
reliably.
Purpose
This Quick Installation Guide tells you how to install your
Switch and how to connect it to your Ethernet network.
This Quick Installation Guide tells you how to install your
Switch and how to connect it to your Ethernet network.
Terms/Usage
In this manual, the term “Switch” (first letter upper case)
refers to your 24-Port 10/100Mbps Fast Ethernet Switch,
and “switch” (first letter lower case) refers to other Ethernet
switches.
In this manual, the term “Switch” (first letter upper case)
refers to your 24-Port 10/100Mbps Fast Ethernet Switch,
and “switch” (first letter lower case) refers to other Ethernet
switches.
1.1 Hardware Interface
• 24-Port 10/100Mbps auto-negotiation RJ45 Ports
• All ports support auto MDI/MDIX, no need to use
• All ports support auto MDI/MDIX, no need to use
cross-over cables
3
1.2 Panel
1.2.1 Front Panel
The front panel of the Switch consists of LED indicators, and
24 10/100Mbps ports. The figure below shows the front panel
of the Switch.
Figure 1-1 Front Panel view of the Switch
• 10/100Mbps Ports (Port 1~24): These ports support 10/
100Mbps, and can operate in Half/Full Duplex transfer
modes. These ports also support automatic MDI/MDI-X
crossover detection, giving true “plug and play” capability.
modes. These ports also support automatic MDI/MDI-X
crossover detection, giving true “plug and play” capability.
• LED Indicators: Comprehensive LED indicators display
the status of the switch and the network (see Section
1.2.3).
1.2.3).
1.2.2 Rear Panel
Figure 1-2 Rear Panel view of the Switch
• AC Power Connector: Supports AC 100~240V, 50~60Hz.