Intermec PF4i 사용자 설명서

In addition to the OPEN and SHARED settings, EasyLAN Wireless can 

also be set to AUTO authenticate. With this setting active, the network 

adapter will decide what to do. However, this setting has been found 

to cause problems in certain environments, which is why the two other 

settings have been made available.
Example:

Shared Key Authentication will be used.
The AUTH setting can also be changed via the printer’s homepage, 

provided the user is logged in as Admin.

 WPA functionality is only supported by IPL v2.50 or 

later.

WPA (Wi-Fi Protected Access) is compatible with the 802.11i standard 

and was developed to counter the weaknesses of WEP and some flaws in 

the key distribution of 802.1x.
WPA can be turned ON or OFF, and the default setting is WPA ON. A 

Pre-Shared Key (PSK, also known as pass phrase) can be used instead of 

802.1x authentication. The PSK must be between 8 and 64 characters 

long. A standardized algorithm is used to convert the PSK to a 256-bit 

key. If the PSK is exactly 64 characters in length, it is interpreted as a 

hexadecimal string specifying the 256-bit key directly. If the PSK is set, 

802.1x settings are not used. It is not possible for any user to read the 

WPA PSK value.

 It is not enough to set ACTIVE (page 39) to “1”, the 

printer has to be rebooted before WPA changes take effect.

Examples:

 

Enables WPA.

 

Disables WPA.