Intermec PF4i 사용자 설명서

Enables validation of the server certificate (TTLS/PEAP only).
All variables may be transmitted by means of:

except EAP_PASS which always returns “****” if configured, CA_CERT 

which transmits the name of the last certificate authority successfully 

installed, and DOWNLOAD_CA which does not transmit anything.
An additional read-only variable is the supplicant state, STATE:

Transmits the supplicant state: “Disabled”, “Failing”, “Authenticating”, 

or “Authenticated”.

 If you start the printer with EAP type set to OFF and 

then change the EAP type to TTLS, LEAP, or PEAP, you need 

to reboot the printer for your new settings to take effect. Until 

you reboot, STATE returns “Disabled”.

802.1x supplicant state, EAP type, outer name, inner authentication, 

installed root certificate, server common names, and server certificate 

validation can be seen on the printer's web page and the network test 

label.

In addition to SSID, WEP, and 802.1x information, the following 

wireless connection variables can be read using IPL commands:
•  Active channel

1,3

•  MAC address of the access point

1

•  Signal strength

1,3

•  Speed

1

•  Region

2

1

/. The information is also given on the network test label and on the 

web page.

2

/. The current region is also presented on the web page.