Trendnet 10/100Mbps mini Print Server 사용자 설명서

Problem No. 5

When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.

Solution No. 5

The problem is due to the printer, which is being configured to Start
printing after the first page is spooled. To change this setting:
•  Go to Control Panel - Printers and click on your printer.
•  Then select File - Properties - Details.
•  When the Details screen appears, click the Spool Settings button.
•  When the Spool Settings dialogue box appears, choose Start

printing after last page is spooled and click OK.

Problem No. 6

The Configuration button on the Printer Status screen in BiAdmin is
grayed out, even though my printer is bi-directional.

Solution No. 6

The button is unavailable if the printer is busy. You must wait until the
printer is idle.

Problem No. 7

My old printer cannot print or prints garbage.

Solution No. 7

If the printer you used is an old model with low speed, the following
steps may solve this problem:

Try the following:
•  Open the BiAdmin Utility.
•  Click the Printer Status icon.
•  Change the Printer Type setting to Low Speed or set the Handshake

Signal setting to Ack & Busy.

Page 55