StarTech.com ECS0016 사용자 설명서

Instruction Manual

76

The first step is to set up the Nagios features on the console server:

Select 

1. 

System: Nagios on the ECS0016 Management Console. 

Check to make sure the Nagios service is 

2. 

Enter the IP address that the central Nagios server will use to contact  

3. 
  the distributed ECS0016 servers in Nagios Host Address.

Enter the IP address that the distributed ECS0016 server will use to  

4. 
  contact the central Nagios server in Nagios Server Address.

Enter the IP address that the clients running MetaConnect will use  

5. 
  to connect through the distributed ECS0016 servers as the  
 

MetaConnect Gateway address. 
Check 

6. 

Prefer NRPE, NRPE Enabled and NRPE Command  

  Arguments.

Check 

7. 

NSCA Enabled, choose an NSCA Encryption Method and enter  

  and confirm an NSCA Secret. Remember these details as you will  
  need them later on. For NSCA Interval, enter: 

5 

Click 

8. 

Apply. 

Next, you must configure the attached Windows network host and specify 
the services you will be checking with Nagios (HTTP and HTTPS): 

Select 

1. 

Network Hosts from the Serial & Network menu and click Add