Acer G901 사용자 설명서

 3 Hardware configuration

86

Removing and installing a fan module

To remove a fan module

1

Remove the front access panel (refer to page 46).

2

Grasp the fan module and pull it straight out of the foam baffle. 

To install a fan module

Note:  If you are replacing a failed fan module, wait for the fan 
status LED to turn off.  Generally, this will take less than ten 
seconds.

1

Remove the front access panel (refer to page 46).

2

Place the fan module into the empty slot of the fan assembly so 
that the fan connector mates with the connector on the fan board.

3

Press down firmly to seat the fan module fully into the connector.

4

Check the fan status LED for the replacement fan.  

If the installation was successful, the indicator will not be lit.

5

Reinstall the front access panel (refer to page 46).

  Figure 45 - Removing and installing a fan module 

BB!H:11!vh!.!FO/cppl!!Qbhf!97!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN