Acer G901 사용자 설명서

89

Front panel board

Installing the front panel board

1

Turn off power to the server and unplug the AC power cords from 
the power source.

2

Remove the front access panel (refer to page 46).

3

Remove the fan modules and the foam fan baffle (refer to 
page 86).

4

Disconnect the cables from the front panel board:  the front panel 
board ribbon cable, the intrusion switch cables, the USB cable, and 
the serial port cable (refer to page 89).

One end of the front panel board is inserted into a slot in the front 
subchassis and the other end is secured with a screw and a 
snap-top standoff.  

5

Remove the screw that secures the front panel board to the front 
of the chassis.

6

Grasp the end of the board closest to the side of the chassis and 
pull to disengage the board from the standoff.

7

Gently slide the board out of the slot in the front subchassis.    

  Figure 47 - Replacing the front panel board

BB!H:11!vh!.!FO/cppl!!Qbhf!9:!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN