Acer G901 사용자 설명서

 4 BIOS setup

112

To clear the CMOS memory using the front panel buttons

1

Power down the server.

2

Press the Reset button and hold it down for four seconds or more; 
while holding down the reset button, press the power button.  

3

Release both buttons at the same time. 

To clear the CMOS memory using  CMOS Clear jumper 

1

Power down the server.

2

Install a jumper on the CMOS Clear jumper pins.

3

Boot the system.

4

Power down the system and remove the jumper from the CMOS 
Clear pins.

The next time the system is started following the CMOS clear, the boot 
process halts displaying the message NVRAM cleared by jumper.

Using BIOS setup

To run BIOS setup, boot the server and press the F2 key when 
prompted.

Use the keys listed in the table below to navigate through the  BIOS 
setup menus.  

F1 or  Alt+H

Get general help

 ®

Move between menus

-

Go to the previous item

¯

Go to the next item

+ or -

Change the value of an item

Enter

Select an item or display a submenu

Esc

Leave a submenu or exit BIOS setup

BB!H:11!vh!.!FO/cppl!!Qbhf!223!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN