Acer G901 사용자 설명서

33

1

Check first to make sure you have not left loose tools or parts 
inside the system.

2

Check that cables, add-in boards, and other components are 
properly installed.

3

Attach the panels to the chassis with the screws removed earlier, 
and tighten them firmly.

4

Insert and lock the padlock to the system to prevent unauthorized 
access inside the system.

5

Connect all external cables and the AC power cord(s) to the 
system.

Hardware setup

The server is shipped without processors, memory, or hard drives.  To 
install the memory, processors, hard drives, and other options, follow 
the steps shown below.  

1

Removing the system access panels:

a

Removing the rear access panel - see page 44

b

Removing the access cover to the system boards - see page 51

2

Removing the memory and processor boards:

a

Removing the memory board - see page 52

b

Removing the processor board - see page 54

3

Installing memory and processors:

a

Installing the DIMMs on the memory board - see page 60

b

Installing the processors on the processor board - see page 64

4

If you are installing an ICMB board - follow the instructions that 
came with the ICMB board kit.

5

Installing the processor and memory boards:

a

Installing the processor board - see page 54

b

Installing the memory board - see page 52

6

Installing PCI add-in cards - see page 67  

7

Installing hard disk drives - see page 78

8

Installing an additional power supply or additional peripherals -
see page 84, page 96, and any additional documentation that 
came with the peripherals.

BB!H:11!vh!.!FO/cppl!!Qbhf!44!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN