Acer G901 사용자 설명서

37

Network teaming features

NIC connector and status LEDs

The NICs drive LEDs on the network interface connectors that indicate 
link connection and activity on the LAN and 10- or 100-Mbps 
operation.  The green LED indicates network connection when on and 
TX/RX activity when blinking.  The yellow LED indicates 100-Mbps 
operation when lit.

Note:   Using both onboard NICs in a team does not allow the use 
of NIC 1 for server management access.  To support both network 
teaming features and server management features, a third NIC 
must be added and teamed to NIC 2.

The network controller provides several options for increasing 
throughput and fault tolerance when running Windows, NetWare, or 
Linux:

•

Adapter Fault Tolerance (AFT)

Provides automatic redundancy for your adapter.  If the primary 
adapter fails, the secondary takes over.  AFT works with any hub or 
switch.

•

Adaptive Load Balancing (ALB)

Creates a team of two to eight adapters to increase transmission 
throughput and includes AFT.  Works with any 10Base-TX or 
100Base-TX switch.

•

Fast EtherChannel (FEC) or Intel

®

 Link Aggregation

Creates a team of up to eight adapters to increase transmission 
and reception throughput and includes AFT.  Requires a FEC-
enabled switch.

To set up an option, read the instructions in the Windows or NetWare 
readme files.

BB!H:11!vh!.!FO/cppl!!Qbhf!48!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN