Lenovo TS130 사용자 설명서
If the POST detects a problem, an error message will be displayed on the screen. A single problem can
cause several error messages. When you correct the cause of the first error message, probably the other
error messages will not be displayed the next time you turn on the computer.
cause several error messages. When you correct the cause of the first error message, probably the other
error messages will not be displayed the next time you turn on the computer.
POST error code
POST error message
Description/Action
00CE
Machine Type or Serial Number is INVALID
This error message is displayed when the machine
type or the serial number is invalid.
type or the serial number is invalid.
0210
Stuck key
This error message is displayed when a key is kept
pressed for a long time.
pressed for a long time.
0211
Keyboard not found
This error message is displayed when there is no
keyboard detected.
keyboard detected.
0135
Fan failure
The system might be overheating.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
press F10 to save the operation and exit the Setup
Utility program.
Note: If the problem is caused by the
microprocessor fan, pressing F10 will not solve
the problem.
microprocessor fan, pressing F10 will not solve
the problem.
0164
Memory size decreased
This error message is displayed when the memory
size has decreased.
size has decreased.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
press F10 to save the operation and exit the Setup
Utility program.
1762
Configuration change has occurred
This error message is displayed when a hard disk
drive or optical drive change has been made.
drive or optical drive change has been made.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
press F10 to save the operation and exit the Setup
Utility program.
1820
More than one external fingerprint reader
is attached. Power off and remove all but
the reader that you set up within your main
operating system.
is attached. Power off and remove all but
the reader that you set up within your main
operating system.
If more than one external fingerprint reader is
connected to a computer, this error message will
be displayed to inform you to remove all of the
fingerprint keyboards except the one compatible
with the fingerprint application on your computer.
connected to a computer, this error message will
be displayed to inform you to remove all of the
fingerprint keyboards except the one compatible
with the fingerprint application on your computer.
1962
No operating system found. Press any key
to repeat boot sequence.
to repeat boot sequence.
This error occurs only after the POST is completed.
Press any key to repeat boot sequence.
Press any key to repeat boot sequence.
0162
Setup data integrity check failure
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
press F10 to save the operation and exit the Setup
Utility program.
0167
No processor microcode update found
This error message indicates that there is
no microcode update image for the current
microprocessor.
no microcode update image for the current
microprocessor.
0175
System security - Security data corrupted
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
press F10 to save the operation and exit the Setup
Utility program.
18
ThinkServer TS130 Hardware Maintenance Manual