Fujitsu TX200 사용자 설명서
191
PRIMERGY TX200 S2 User’s Guide
Inst
a
llin
g hardw
g hardw
are option
s
7
■ Notes When Installing Memory
The memory used in this server is composed of a pair of DIMM. Make sure to install a pair of DIMMs,
each having the same capacity.
●
Identifying Memory Modules
Check that the number beginning with "CA" (e.g., CA05946-E101) printed on the label is same on the
two DIMMs. Be sure to use a pair of modules with the same number. If the DIMMs have identification
labels, be sure to install a pair of DIMMs with the same capacity with the label placed on the same
location.
• Identification label location
• Identification label patterns
When a memory module is viewed so that the corner circled in the above figure comes to the lower
left, identification labels are applied in any of the following patterns.
table: Identification Label Patterns
Pattern
Label A
Label B
Label C
1
Not applied
Not applied
Not applied
2
Applied
Not applied
Not applied
3
Applied
Applied
Not applied
4
Not applied
Not applied
Applied
5
Applied
Applied
Not applied
6
Applied
Not applied
Applied
7
Not applied
Applied
Applied
8
Applied
Applied
Applied
Identification label A
Identification label B
Identification label C
1