Fujitsu TX200 사용자 설명서
257
PRIMERGY TX200 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
■ Device Properties Submenu
Select [Device Properties] in the [Adapter Properties] window and press the [Enter] key to display the
submenu.
■ RAID Properties Submenu
Select [RAID Properties] in the [Adapter Properties] window and press the [Enter] key to display the
submenu.
table: Items on the Device Properties Submenu
Item
Setting
Description
Restore Defaults
Reads default values for the controller.
MT/Sec
• 80 (at the time of
purchase)
• 40
• 20
• 10
• 5
• 0
• 20
• 10
• 5
• 0
Sets the maximum transfer rate.
MB/Sec
Displays the maximum transfer rate.
Data Width
• 16 (at the time of
purchase)
• 8
Specifies the maximum data transfer width.
Scan ID
• Yes (at the time of
purchase)
• No
Sets whether or not to scan this device at startup.
Scan LUNs > 0
• Yes (at the time of
purchase)
• No
Sets whether or not to scan LUN=1 and subsequent
LUNs at startup.
LUNs at startup.
DISCONNECT
• On (at the time of
purchase)
• Off
Sets whether or not to permit disconnection during
command execution.
command execution.
SCSI Timeout
10
Specifies the timeout period during command
execution.
execution.
QUEUE TAGS
• On (at the time of
purchase)
• Off
Sets whether or not to issue multiple commands to
devices at the same time.
devices at the same time.
table: Items on the RAID Properties Submenu
Item
Setting
Description
Array Disk?
No (Fixed parameter)
Sets whether or not to configure an array.
The server does not support this yet. Cannot be set.
The server does not support this yet. Cannot be set.
Hot Spare
No (Fixed parameter)
Sets whether or not to configure a hot spare.
The server does not support this yet. Cannot be set.
The server does not support this yet. Cannot be set.