Fujitsu TX200 사용자 설명서
307
PRIMERGY TX200 S2 User’s Guide
Ap
pend
pend
ix
A
C.2
Connecting the Server to a PC
Connect the server to a PC using an RS-232C cross cable.
C.3
Configuring the Terminal Software (PC)
Perform the settings to enable use of the remote control function using terminal software on the PC.
■ Port Configuration
Configure the port on the PC as follows:
table: Port Settings
Item
Contents
Bits/sec.
9600
Data bit
8
Parity
Not applied
Stop bit
1
Flow control
Not applied
[PC - Rear]
[Server - Rear]
1
Server management port
Serial port
RS-232C cross cable